User Guide
Dust fighter_user guide_1.2_EN_28-06-22
5
Preliminary Checks
Before use, check that the Dust Fighter:
Is positioned on flat ground in a well ventilated area
Has protective barriers positioned approximately 2m around the unit
Is correctly connected to a suitable water supply
Is correctly connected to a 240V 60 Hz power source
Has no cut, worn or bare electrical cords and that all electrical connections are secure
Starting the Unit
Lifting the Unit
Safety Notes:
Do not use the lifting eye if there are signs of damage or corrosion.
Do not use the lifting eye for anything other than its intended use.
Be aware of people and objects onsite when moving or lifting the unit.
Note:
The Dust Fighter should only be lifted using
equipment with sufficient load capacity.
When lifting the unit, attach any slings,
chains or hooks directly to the central lifting
point
‘A’
Use the forklift pockets
‘B’
with care: avoid
approaching the unit at an angle as this
can cause permanent damage to the
forklift pockets, tires or cabinet.
Press start button
‘A’
to start the fan.
Open valve
‘B’
to release the water vapour from the
nozzles.
Safety Note:
Never direct the water jet toward people or animals: shut down immediately
if people or animals enter the working area.
2.
1.
2.