User Guide
Dust fighter_user guide_1.2_EN_28-06-22
6
Adjusting the Jet Angle
1.
Pull the tilting blower knob
‘A’
2.
Use handle
‘B’
to tilt the Dust Fighter
blower to the desired angle.
3.
Release the tilting blower knob
‘A’
to lock
the unit in position.
Stopping the Unit
1.
2.
Close the water valve
‘A’
and wait for water to stop spraying
from the nozzles.
Press stop button
‘C’
to stop the fan.
Do
Do Not
Read this user guide before operation
Wear appropriate PPE
Check for damage before every use
Keep clothing, hair and appendages away from moving
parts
Avoid water contact with a power source
Ensure the electrical system is properly grounded
Operate the unit only when secured on a firm, level
surface
Only use water from a controlled, reliable source
Properly connect lifting cables, chains or straps
Only use certified lifting equipment
Store the Dust Fighter on firm level ground, in a safe, dry
clean area when not in use or when ready for collection
X
Inadvertently ‘ground’ the Dust Fighter
X
Allow personnel into the working zone during operation
X
Block or restrict the air/water flow
X
Interfere with the Dust Fighter whilst in operation
X
Drop or strike the Dust Fighter
X
Allow untrained personnel to operate the Dust Fighter
X
Use the Dust Fighter if the electrical cord is worn or cut
X
Use the lifting eye if there are signs of damage or
corrosion
X
Operate if the Dust Fighter is found to be damaged in any
way
X
Direct the water jet toward people or animals
X
Use the Dust Fighter under water
X
Use the Dust Fighter for anything other than its intended
use
X
Undertake any maintenance on the Dust Fighter - contact
Sandhurst
Note:
Do not attempt any repairs or maintenance on the Dust Fighter - contact Sandhurst.
