BASIC ADJUSTMENTS & CONTROLS
CONNECTING TO A POWER SOURCE
TO REDUCE THE RISK OF SHOCK OR FIRE DO NOT OPERATE
THE UNIT WITH A DAMAGED POWER CORD OR PLUG.
REPLACE DAMAGED CORD OR PLUG IMMEDIATELY.
TO AVOID UNEXPECTED OR UNINTENTIONAL START-UP, MAKE
SURE THAT THE POWER SWITCH IS IN THE OFF POSITION
BEFORE CONNECTING TO A POWER SOURCE.
SAFETY KEY
(PREVENTS START-UP
WHEN REMOVED)
POWER ON
POWER OFF
1
2
3
A
B
-
To start the machine, insert the safety key,
1
,
and lift the switch up,
2
.
-
To stop the machine, push the switch down,
3
.
ON/OFF SWITCH & SAFETY PIN (MODEL 15-035 ONLY)
The ON/OFF switch assembly on the 15-035 is equipped
with a lock-out safety pin
A
. When the pin is installed
through the green “on” button
B
, the machine cannot
be started.
A
B
C
To start the machine
Lift the red stop switch panel
C
and remove the lock-
out pin. Lower the stop panel and push the green “ON”
button. Wait for the sanding belt/disc to reach full
speed before sanding.
To stop the machine
Push on the RED “STOP” panel and wait for the sanding
belt/disc to come to a complete stop.
WHEN YOU HAVE FINISHED USING THE MACHINE BE SURE TO RE-INSTALL THE LOCK-OUT PIN AND UNPLUG THE
SANDER FROM THE POWER SOURCE.
15
Once the assembly steps have been completed, uncoil the power cord
and plug into an appropriate outlet. Refer back to the section entitled
“Electrical Requirements” and make sure all requirements and ground-
ing instructions are followed. When sanding operations have been
completed turn off and unplug the sander from the power source.
INTERRUPTEUR(S)
EN POSITION ARRÊT
INTERRUPTEUR EN
POSITION D’ARRÊT
ON
ON/OFF POWER SWITCH WITH SAFETY KEY (MODEL 15-035DC ONLY)
The 15-035DC is equipped with 2 ON/OFF power switch-
es with a removable lock out safety key: one for the
sanding belt/disc motor
A
and one for the built-in dust
collector motor
B
.
TO PREVENT UNWANTED OR UNAUTHORIZED START-UP OR USAGE, REMOVE THE LOCK-OUT KEYS AND STORE THEM IN A SAFE PLACE,
OUT OF THE REACH OF CHILDREN, WHENEVER THE SANDER IS NOT IN USE.
Summary of Contents for 15-035 MI
Page 27: ...Notes 27...
