9
BASIC ADJUSTMENTS AND CONTROLS
CONNECTING TO A POWER SOURCE
Once the assembly steps have been completed, uncoil the power cord,
, and plug it into an appropriate outlet,
,
(refer back to the section entitled "Electrical Requirements" and make sure all requirements and grounding instruc-
tions are followed).
To avoid risk of shock or fire do not operate the unit with a damaged power cord or plug. Replace
damaged cord or plug immediately.
To avoid unexpected or unintentional start-up, make sure that both of the power switches on the sander are
in the OFF position before connecting to a power source.
ON/OFF POWER SWITCHES
This sander is equipped with 2 different ON/OFF power switches: one magnetic switch for the drum motor and one
switch with a safety key for the conveyor motor.
DRUM MOTOR MAGNETIC SWITCH
This model 15-150 M1 drum sander is equiped with a
MAGNETIC SAFETY SWITCH,
, located on the control
box designed to protect the unit and the user from
power surges, power outages and unwanted or unin-
tentional start-up.
The switch assembly is equipped with a GREEN “START”
button,
, and a RED spring loaded “STOP” button,
.
Once the RED “STOP” button has been pressed, the
machine can only be started by turning the BLACK
inner part of the button to the right to release the stop
button,
.
MAGNETIC SWITCH
DÉMARREUR MAGNÉTIQUE
CONVEYOR MOTOR SWITCH WITH SAFETY KEY
Remove the switch key and store it in a safe place, out of the reach of children, whenever the sander is not in use.
ON
REMOVE
TO LOCK
OFF
REMOVE
TO LOCK
OFF
OFF
ON
REMOVE
TO LOCK
OFF
REMOVE
TO LOCK
OFF
OFF
ON
REMOVE
TO LOCK
OFF
REMOVE
TO LOCK
OFF
OFF
SAFETY KEY*
ON
*
*
PREVENTS START-UP WHEN REMOVED
OFF
This model 15-150 M1 is also equiped with a simple
ON/OFF switch for the conveyor motor, featuring a
removable lock out safety key.
To start the conveyor belt, insert the safety key,
.and
lift the switch up,
. To stop the machine, pull the switch
down,
.
To prevent unauthorized use or unintentional start-up,
remove the safety key and store it in a safe place
whenever the sander is not in use.
MAGNETIC SWITCH
DÉMARREUR MAGNÉTIQUE
ON
REMOVE
TO LOCK
OFF
SWITCHES
OFF
