10
BEFORE ASSEMBLING, MAKE SURE THAT THE SWITCH IS IN THE “OFF” POSITION AND THAT THE POWER CORD IS
UNPLUGGED. DO NOT PLUG IN OR TURN ON THE MACHINE UNTIL YOU HAVE COMPLETED THE ASSEMBLY AND
INSTALLATION STEPS DESCRIBED IN THIS SECTION OF THE MANUAL.
3
. Hold the head above the stand and align the
mounting bolts as shown
C
.
4
. Place the supplied shock absorbers in the loca-
tions shown
D
and lower the head on its stand with
the four mounting bolts in the mounting holes on
the stand
E
.
5
. Secure the head to the stand from below using two
12 mm nuts with two lock washers at the rear
F
and
two 17 mm nuts with two flat washers at the front
G
.
INSTALLING THE MACHINE HEAD ON THE STAND
C
D
E
F
G
G
F