ENGLISH
6
GETTING STARTED
Before operating your tool, check the contents of the box to make sure
you have everything you will need. Items included in the box:
Air
Compressor
Air Filter
Bottle
of Oil
Oil Breather Cap
Air Regulator w/ Air Chuck
Owner’s Manual
POWER SOURCE CONNECTION
POWER REQUIREMENTS
This tool is designed to operate on a properly grounded 120 volt, 60 Hz,
single phase alternating current (AC) power source fused with a 15 amp
time delayed circuit breaker. It is recommended that a qualified electrician
verify the ACTUAL VOLTAGE at the receptacle into which the tool will be
plugged and confirm that the receptacle is properly grounded. The use of
the proper circuit size can eliminate nuisance circuit breaker tripping when
using your tool.
CAUTION:
DO NOT OPERATE THIS TOOL if the ACTUAL power
source voltage is less than 105 volts AC or greater than 132 volts
AC. Contact a qualified technician if this problem exists. Improper
performance, and/or, damage to the tool will result if operated on
inadequate, or excessive power.
CONNECT TO POWER SOURCE
Consult a qualified electrician for proper installation of receptacle at the
source of power. This tool must be grounded while in use to protect the
operator from electrical shock. If you are not sure if your outlet is properly
grounded, have it checked by a qualified electrician. Make sure the tool is
turned OFF when connecting the power cord to a properly grounded 120
Volts, 60 Hz, single phase, 15 amp power source.
GET TO KNOW YOUR TOOL
!
A
J
E
C
D
B
F
H
G
I
Summary of Contents for AC1106
Page 12: ...ENGLISH 12 SCHEMATIC DRAWING...
Page 13: ......
Page 14: ......
Page 28: ...FRAN AIS 28 SCH MA...
