14
ENG
L
ISH
OPERATING
INSTRUCTIONS
CAUTION:
Always turn on the dust
collector before starting your dust-producing
machinery and always stop the dust-
producing machinery before turning off the
dust collector.
BEFORE STARTING
1.
To minimize airborne dust make sure that
all hoses, fittings and clamps are secure
and airtight.
2.
For maximum system efficiency,make sure
a cover is installed on any unused hose
inlet openings.
3. Never operate the machine without the
filter bag and the collection bag properly
installed.
4.
The sound level of this machine is rated at
approximately 80-85 db during operation.
Make sure that adequate hearing
protection is used and that the overall
sound level within the working environment
is taken into consideration.
CAUTION:
Make sure the switch is in the
“OFF” position before plugging in the power
cord.
1. Assemble the dust extractor as described
under “Assembly”.
2.
Select the hose adaptor to suit the dust
extraction adaptor on the power tool to be
used.
3. Ensure that the dust extraction adaptor on
the power tool connects securely to the
flexible hose of the dust extractor. Use one
of the hose adaptors if required.
4.
Connect the cordset of the dust extractor to
a power supply.
5.
Move the On/Off switch of the dust extractor
(fig 5) to the “I” position.
!
!
Summary of Contents for BT8008
