background image

22

23

Note :

 

●  The  blood  glucose  test  must  be  performed  within  3  minutes,  otherwise
      the  meter  will  be  turned  off  automatically.  If  turned  off,  remove  and 
    re-insert the test strip to do the test again.
●  Test  strips  cannot  be  reused.  If  a  used  test  strip  is  inserted,  a  warning 
   message “ E-U ” will display on the screen. Always use new test strips.
●  If  the  wrong  end  of  the  test  strip  is  inserted,  or  if  the  test  strip  is  inserted
   backwards the meter will not activate.

Warning :

● Lancet cannot be reused.
● Please always use certifi ed lancets to ensure safety.

3.2 Perform the Blood Glucose Test
Directions :

1.

Insert the BeneCheck GLU

PLUS

 Glucose Test Strip and take a 

blood sample according to the instructions for lancing device 
in the system. 

2.

Touch the sample inlet of the test strip to the drop of blood 
sample  until  the  meter  sounds  a  “beep”  that  means  the 
sample is drawn into the strip successfully.

3.

The  screen  will  display  a  countdown.  After  countdown  the 
screen will display the glucose results. 

Summary of Contents for BENECHECK GLU






















Reviews: