General Life Biotechnology BENECHECK GLU, User Manual

10

11

Set the Year

1.  Press  the  front  button  to  advance  one  year  until  you  get  a
    correct year number.
2.  After you set the desired year number, press the back setting 
     button again; the meter then enters into month setting. 

Set the Month

1.  Press  and  release  the  front  button  until  the  correct  month 
    appears.
2. Press the setting button and the day segment will start blinking.

Set the Day

1. Press and release the front button until the correct day appears.
2. Press the setting button and the hour segment starts blinking.

Set the Hour

1.  Press  and  release  the  front  button  until  the  correct  hour 
     appears.
2. Press the setting button and the minute segment starts blinking.

3.

0197

PLUS Glucose Meter

Model : PD-G001-2

     General Life Biotechnology Co., Ltd.

5F, No.240, Shinshu Road,

Shin Juang City, Taipei, 242 Taiwan

Battery : CR2032 X 1

Bene

Check

Doc No. 10-RN01-L-48A

Please back the cover onto the meter. 

4.

T

O

S

H

I

B

A

LIT

HIU

M

BA

TT

ER

Y

CR

203

2

3V

JAP

AN

PLUS Glucose Meter

Model : PD-G001-

     General Life Biotechnology Co.

5F, No.240, Shinshu R

Shin Juang City, Taipei, 242 

Battery : CR2032 X 1

Bene

Replacing Battery
● Remove the back cover lid.
●  Gently  pulling  backward  on  the  battery  ejection  tab,  and 
battery will dislodge from the battery chamber.
●  Remove  the  old  battery  with  a  new  battery,  and  close  the 
back cover lid.

2.2 Set the Year/Month/Day/Hour/Minute/Temperature unit

After a battery is installed in the meter for the fi rst time (as described in 2.1), the 
meter

goes into setting mode automatically.

The directions to setting mode. 

Open the battery cover (on the back of the meter), press the setting button then 
a

number such “08” will blink on screen, which means Year.