12
13
Set the Minute
1. Press and release the front button until the correct minute
appears.
2. Press the setting button and the Measurement unit (mg/dL or
mmol/L) starts blinking.
Set the Measurement Unit
1. Press and release the front button to select the unit of measure
mg/dL
or
mmol/L
.
2. Press the setting button once to fi nish the setting and turn off
the meter automatically.
2.3 Coding the Meter
The BeneCheck GLU
PLUS
Glucose Meter should be coded before testing with
BeneCheck Glucose Test
Strips for the first time, or every time a new box of
BeneCheck Glucose Test Strips is
used. Each vial of test strips has an assigned
code number. The code strip is packaged
with the test strip in order to calibrate/
code the meter. Every time a test strip is
inserted, please be sure to check the
code number appearing on the screen is the
same as the code number marked on
the test strip vial.
Directions :
1.
Check the code number on the code strip is the same as the
code number on the
test strip vial.
2.
Insert code strip into the test port of the meter.
Summary of Contents for BENECHECK GLU
Page 1: ......
