Model FL3102
15
3.4 Terminal
Connections
All wire connections are made through the ¾ NPT openings in the Base
Assembly to the terminal block (See Figure 22). The Terminal Block is located on
the Base Assembly (See Figure 23) and accepts 12 AWG to 22 AWG stranded
or solid-core wire. Each wire should be stripped as shown in Figure 20.
Figure 20 Wire-Strip Length
To connect the wire to the Terminal Block, insert the conductor into the
connection space as shown in Figure 23 and tighten the corresponding screw
terminal.
Figure 21 Detector Housing and Base