FL4000
29
Figure 17: Dimensional Drawing
3.6 Terminal Connections
All wire connections are made through the ¾ inch (1.9 cm) NPT openings in the Junction
Module (C, Figure 15) to the Terminal Block. The Terminal Block is located on the Junction
Module Assembly (F) and accepts 14 AWG (2.08 mm
2
) to 22 AWG (0.33 mm
2
) stranded or
solid-core wire. Each wire should be stripped as shown in Figure 18.
Figure 18: Wire-Strip Lengths
To connect the wire to the Terminal Block, insert the conductor into the connection space
(Figure 20) and tighten the corresponding screw terminal.
.
