background image

These instructions are intended to  

familiarize all personnel with the safe  

operation and maintenance  

procedures for the Easy Rooter. 

 

DANGER indicates a hazard with a high level of risk 
which, if not avoided, will result in death or serious injury. 

WARNING indicates a hazard with a medium level of risk 
which, if not avoided, could result in death or serious injury. 

CAUTION indicates a hazard with a low level of risk which, 
if not avoided, will result in minor or moderate injury. 

 

 

 

WARNING!  Read  and  understand  all         
instructions. 

Failure to follow all instructions 

listed below may result in electric shock, fire 
and/or serious personal injury. Replacement 
manuals are available upon request at no 
charge, or may be downloaded from our web-
site, 

www.drainbrain.com

. Instructional videos 

are available for download on our website, and 
may be ordered.  If you have any questions or 

problems, please call General’s customer 

 

service department at 412-771-6300. 

 

SAVE THESE INSTRUCTIONS!

 

SAFETY SYMBOLS 

Easy Rooter™ 

 

Electric shock resulting in 
death can occur if you plug 
this machine into an improp-
erly wired outlet.  If the ground 
wire is electrified, you can be 
electrocuted by just touching 
the machine, even when the 
power switch is off.  

A ground 

fault circuit interrupter will not pro-
tect you in this situation.  Use a 
UL approved tester to determine 
if the outlet is safe.

 

 

Do not operate power tools in    
explosive atmospheres, such 
as in the presence of flamma-
ble liquids, gases, or dust.

  

Power tools create sparks which 
may ignite the dust or fumes.

 

Only wear leather gloves. 
Never use any other type of 
glove, such as cloth, rubber, or 
coated gloves.  Never grasp a 
rotating cable with a rag. 

 

These items could become 
wrapped around the cable and 
cause serious injury.

 

 

Always wear safety glasses 
and rubber soled, non-slip 
shoes. 

 

 

Use of this safety equip-

ment may prevent serious injury.

 

Never operate machine with 
belt guard removed.

  Fingers 

can get caught between belt and 
pulley.

 

 

Do not overstress cables.   

Overstressing cables may cause 
twisting, kinking, or breaking of 
the cable and may result in seri-
ous injury.

 

 

 

This is the safety alert symbol. It is 

used to alert you to potential personal 

injury hazards. Obey all safety mes-

sages that follow this symbol to avoid 
possible  injury or death.

 

Summary of Contents for Easy Rooter







Reviews: