background image

 

 

 

WARNING!    Read  and  understand  all        
instructions. 

Failure  to  follow  all  instructions 

listed  below  may  result  in  electric  shock,  fire 
and/or  serious  personal  injury.  Replacement 
manuals  are  available  upon  request  at  no 
charge, or may be downloaded from our web-
site, 

www.drainbrain.com

.  Instructional  videos 

are available for download on our website, and 
may be ordered.  If you have any questions or 
problems, please call General’s customer  
service department at 412-771-6300. 

 

SAVE THESE INSTRUCTIONS!

 

SAFETY SYMBOLS 

Sewerooter T-3™  

Electric  shock  resulting  in  death 
can occur if you plug this machine 
into an improperly wired outlet.  If 
the  ground wire  is  electrified,  you 
can be electrocuted by just touch-
ing  the  machine,  even  when  the 
power  switch  is  off.   

A ground fault 

circuit interrupter  will not  protect  you 
in this situation.  Use a UL approved 
tester  to  determine  if  the  outlet  is 
safe.

  

Do  not  operate  power  tools  in    
explosive atmospheres, such as in 
the presence of flammable liquids, 
gases,  or  dust.

  Power tools create 

sparks  which  may  ignite  the  dust  or 
fumes.

 

Only  wear  leather  gloves.  Never 
use  any  other  type  of  glove,  such 
as cloth, rubber, or coated gloves.  
Never  grasp  a  rotating  cable  with 
a  rag.   

These  items  could  become 

wrapped around the cable and cause 
serious injury.

  

Always  wear  safety  glasses  and 
rubber  soled,  non-slip  shoes. 

 

 

Use  of  this  safety  equipment  may 
prevent serious injury.

 

Never  operate  machine  with  belt 
guard  removed.

    Fingers  can  get 

caught between belt and pulley.

  

 

Never  operate  machine  without 
the Guide Tube in place. 

Can result 

in significant hand injury.

 

Do not overstress cables.   

Overstressing  cables  may  cause 
twisting,  kinking,  or  breaking  of  the 
cable  and  may  result  in  serious  in-
jury.

  

These instructions are intended to  

familiarize all personnel with the safe  

operation and maintenance  

procedures for the Sewerooter T-3. 

 

DANGER indicates a hazard with a high level of risk 
which, if not avoided, will result in death or serious injury. 

WARNING indicates a hazard with a medium level of risk 
which, if not avoided, could result in death or serious injury. 

CAUTION indicates a hazard with a low level of risk which, 
if not avoided, will result in minor or moderate injury. 

 

This is the safety alert symbol. It is 

used to alert you to potential personal 

injury hazards. Obey all safety mes-

sages that follow this symbol to avoid 
possible  injury or death.

 

WARNING 

This  product  can  expose  you  to  chemicals  including  lead, 

which is known to the State of California to cause cancer and 
birth defects or other reproductive harm. For more information 

go to 

www.P65Warnings.ca.gov

 

Summary of Contents for P-T3









Reviews: