10
Operating Instructions
WARNING
:
Electrical Connections All electrical connections must be
done by a qualified electrician. All adjustments or repairs
must be done with the dust collector disconnected from
the power source, unplugged. Failure to comply may
result in serious injury!
The #10-105/#10-105CF dust collectors are rated at
110/220V, Prewired 110V. Use a plug and outlet rated at
least 20 amps. The circuit for the machine should also be
protected by a minimum 20 amp circuit breaker or fuse.
Keep in mind that a circuit being used by other machines,
tools, lights, heaters, etc. at the same time will add to the
electrical load.
A dedicated circuit to the dust collector will give you the
best results since dust collectors are generally used at the
same time other tools are running. Turning the Machine
On & Off This machine is intended for indoor use only. All
Models Before hooking up to the power source, make
sure that the switch is in the off position
ON/OFF SWITCH
The model 10-105M1/10-105CF M1 Dust collector is
equipped with a si
mple “rocker style” On/Off switch
featuring a removable lock out safety key.
To prevent unauthorized use or unintentional start-up,
remove the safety key and store it in a safe place when-
ever the dust collector is not in use.
To start the dust collector, insert the safety key and pull
up the switch. To stop the machine, push down on the
power switch.
WARNING
:
Make sure the switch is in the “OFF” position before
plugging in the power cord.
Remove the switch key whenever the dust collector is not
in use. Place it in a safe pace and out of the reach of
children.
Picture of switch in ON position.
Picture of switch in OFF position
Picture of Safety Key removed (Prevents
start-up when removed)
