Fig. 2. All possible display
indications
A. Air speed unit: m/min
B. Air speed unit: m/s
C. Air speed unit: km/h
D. Air speed unit: ft/min (fpm)
E. Air speed unit: m/h (mph)
F. Air speed unit: knots
G. Maximum air speed indication
H. Minimum air speed indication
I. Average air speed indication
J. Low battery icon
K. Reading hold indication
L. Wind chill indication
M. Air speed reading
N. Temperature reading
O. °F indicator
P. °C indicator
SETUP INSTRUCTIONS
ACTIVATE BATTERY
1. Turn the anemometer over and use a coin to open the battery
compartment at the bottom of the unit.
2. Remove the activation tab under the pre-installed “CR2032” battery.
3. Replace the battery compartment cover and hand-tighten it with the coin.
Complete Setup by carefully removing the plastic film protecting the LCD.
OPERATING INSTRUCTIONS
MEASURING REAL-TIME AIR SPEEDS
To power on the DAF3008
, briefly press the
/WCI button. The LCD will
illuminate with the backlight on and the unit will automatically enter real-time
measurement mode. The backlight will turn off after 15 seconds if no front-
panel button is pushed. Pushing any button begins another 15 seconds of
backlight.
4
