4
ALM/CLEAR
• Display the alarm set time
• Enter the alarm setting mode
• Erase the currently displayed max. or min. temperature and humidity readings
ºC/ºF
• Change the temperature’s unit between ºC and ºF
• Change the meter between a 12 and a 24 hours clock
MAX./MIN.
• Display the max. or min. temperature and humidity
• Make the unit return to current temperature and humidity mode
NOTE:
Every paragraph is independent.
The two flashing dots between hour and minute readings on LCD indicate
the current time mode.
1. RESET
Press RESET to erase all settings and the meter returns to the default settings
(the default time—12:00 in 24 hours clock mode, the default date—1-01,
first January).
2. TIME, DATE AND SETTING
Make sure that the meter is in current time mode.
• Press
Mode
to change between current time and date modes. If the meter
is in date mode, it will return to current time mode 8 seconds later
automatically.
• To enter time setting mode, press and hold
Mode
until the hour reading
flashes, and flashing reading can be adjusted by pressing
Set Alm
(or hold
Set Alm
for fast scroll). In this mode, press
Mode
to step through the
selections: hour > minute > month > day > exit.
If you do not operate the meter for 8 seconds, it will return to current time
mode.
3. ALARM FUNCTION
In the current time or date mode, press
Set Alm
to disable or enable time alarm
function. When the time alarm function is enabled, “
” appears on the LCD.
