-16-
Selecting
1. SEQUENCE
calls up a screen with the text
SEQUENCE
over two lines:
START
and a 4-digit value, and
FINISH
and a 4-digit value. By alternating presses of
the
button (to view or change the value of each digit) with presses of the
button (to save settings and select the next digit in turn), you can designate the
number of the starting and ending memory locations to involve in batch data transfers
to a PC. When you are satisfied with the memory location settings, press the
button
to resume display of the main memory screen.
Selecting
2. BATCH STORE
calls up another screen with the text
BATCH OUT
over
two options:
BATCH 1. TO 12.
and
SELECT BATCH 1
. Use the
or
button to
change the value on the lower line from the default value of 1 to any number from 1 to
12, representing the number of the batch to be transferred to a PC. Then press the
button. The unit will automatically resume display of the main memory screen.
8.
Selecting
8. CALIBRATION
calls up a screen with the text
CALIBRATION
over three
lines
: CAL. RANGE, AVG. DATA and CAL. DATA
.
