background image

CONTROL PANEL

5

Using the Laser (continued)

Manual grade  

mode button

Tilt alarm button

Power button

Tilt alarm indicator

Power indicator

Speed control button

X/Y axis indicator  

(manual grade mode)

POWER SUPPLY

Rechargeable battery pack

•   

   The laser level is supplied with a rechargeable 

Ni-MH battery pack that is located in the base of 

the laser level. 

•   

   The rechargeable battery pack is supplied only 

partially charged. Charge the rechargeable battery 

pack before use. Keep the rechargeable battery 

pack in the carry case when not in the laser level.

•   

   The power indicator light will flash when the 

battery is low. The laser level should be re-charged 

as soon as possible.

•   

   Battery pack capacity decreases at low 

temperatures; a depleted pack may not function 

when cold.

Indoor charger

•   

   The indoor charger is for indoor use only.

•   

   Do not store in locations where moisture can be 

present or where the chargers could be exposed to 

extreme temperatures.

•   

   If a charger becomes damaged, stop using 

immediately and seek a replacement.

               

 WARNING!

 

Only use the supplied 

charger. Using an incorrect charger will 

void the warranty. Do not charge alkaline 

batteries.

!

Summary of Contents for GRL20GSTDKT

















Reviews: