1
INFORMATION ABOUT THE APPLIANCE
1.1
GENERAL WARNINGS
The appliance must only be used by personnel who has carefully studied this manual and
understood all the safety standards described herein.
If there should be a turnover in personnel, it is necessary that this manual is carefully studied
before using the appliance.
Although safety devices are installed on the appliance, avoid touching the moving parts with your
hands and avoid touching the appliance with wet hands.
Before cleaning or servicing the appliance, disconnect the electricity power supply.
When cleaning or servicing the
GSM-50 AND GSM-100
(safety protections removed) take into
consideration all possible hazards-Residual Risks.
When cleaning or servicing the appliance always concentrate on what you are doing and avoid
any possible distractions.
Check the electricity power cable on a regular basis (to avoid electrical hazards and twists in the
cable always completely unwind it);a worn or damaged cable causes a dangerous electrical
hazard;aviod pressing the cable with weights or leaving it on hearted or sharp cutting
Surfaces and avoid pulling the cable to remove the plug from the socket.
If the
GSM-50
and
GSM-100
has a presumed malfunction or does not work correctly, do not use it
or repair it.contact the
“Service Centre”.
This appliance is designed for only mincing meat in the mincer.Do not use this appliance for
frozen food or non-food products and do not insert any metallic objects into the mincer.
The manufacture cannot be held responsible for the following situations:
If the appliance or safety devices are tampered with by unauthorized personnel;
If non-original spare parts are used;
If the instructions given in this manual are not carefully followed or respected;
If unsuitable cleaning products (inflammable, corrosive or toxic) are used to clean the appliance.
1.2 SAFTY FEATURES INSTALLED
Safety features against electrical hazards conform to standards GB4706.38-2003, whereas mechanical
safety features conform to GB4706.38-2003.
The
GSM-50
and
GSM-100
is fitted out with:
Relay in the command circuit for restarting the appliance if there if there is a power cut;
The
GSM-50
and
GSM-100
is fitted out with electrical and mechanical safety protection that conform to
the standards in force .These protections are for when the appliance is working and when it is being
cleaned or serviced .However ,there are RESIDUAL RISKS that cannot be completely eliminated and
are indicated by the wording CAUTION in this manual. These risks refer to the risk of being cut or
injured when handling the blade on the
GSM-50
and
GSM-100
while cleaning.
1.3
APPLIANCE DESCRIPTION
1.3.1
GENERAL DESCRIPTION
We have designed and manufactured the HM-12/HM-22/HM-22A guaranteeing;
The maximum of safety when using, cleaning and servicing;
The maximum of hygiene thanks to a meticulous selection of the materials that come in contact
with the food product, and thanks to the elimination of any sharp and rough edges that comes in contact
with the product, cleaning is easy and thorough;
