GENEREX SYSTEMS Computervertriebsgesellschaft mbH - www.generex.de - 10
GENEREX Systems Inc. - www.generex.us
The
BACS bus cables
are components specially
designed for BACS system usage. By using substi-
tute cables, the overall function of the system can
not be guaranteed. In order to avoid unnecessary
cable length, the bus cables are available in various
length.
Installation instructions
Cable length
The maximum distance between the last module
and the
BACS WEBMANAGER
is
60 m (2364 in-
ches)
. A
splitting box
will not increase distances.
Number of modules per line
A
BACS bus cable
can hold a maximum of 50
connected modules. The modules can be connected
to the bus in any order. It is not necessary to
connect the modules of the addresses in sequence.
Connection to the BACS WEBMA-
NAGER/BACS Bus Converter
For operation, the nearest module must be connec-
ted to the
BACS Bus Converter
or the
BACS WEB-
MANAGER
via a bus connection.
Increasing fail-safety
For increased failure safety, the bus line should be
installed as a ring bus system. If a connection is
interrupted at a single point, the operation ability of
the installation is ensured.
Installation of the
BACS Bus Cables
Insert the plugs of the Bus cables into the sockets of
the
BACS modules
(see illustration to the right).
1b
2b
“side by side“:
“behind“:
“among each other“:
1a
3
2a
Order No.:
B4BCRJXX
1.4. Installation BACS Bus Cables
