GENEREX SYSTEMS Computervertriebsgesellschaft mbH - www.generex.de - 27
GENEREX Systems Inc. - www.generex.us
Connection Diagram for the WEBMANAGER
5. Activating the
Operating Mode
This step is only necessary if you are running the
webmanager
in configuration mode. If the sliding
switch is in the correct position you may just need to
check if the IP address is correct and the BACS
webmanager
shows login dialog as expected.
1.
Remove the power supply from the
WEBMANAGER
.
For the slot versions, pull the card out of the slot of your
UPS.
2.
To switch the
WEBMANAGER
to operating mode,
„
left position
“:
manual IP
„
right position
“:
IP via DHCP
3. Connect the
WEBMANAGER
to the power supply. After
the boot process, the adapter is accessible on the confi-
gured IP address.
After about 2 minutes, the boot process is complete
and the web manager can be reached via the confi-
gured IP address.
Note:
If you are running your adapter in DHCP mo-
de, this step is omitted.
Sliding switch to left
EU: 230V AC / 12 V DC
US: 120V AC / 12V DC
