55
Englis
h
4 Checks prior to operation
4.1 Battery connection and charge
The battery is provided with a
disconnected
terminal.
Before
connecting the battery, check that the
fuel selector is in the "OFF" position.
If you have any questions on
identifying the fuel selector, check
chapter
3.1
(panel
components
identification).
Avoiding
any
unwanted
contacts
connect the generator power cables
on the battery terminals:
Negative cable (-) on negative terminal (-) (Black)
Positive cable (+) of discharge on positive terminal (+) (Red)
Charge cable (white) on charge terminal.
NOTE:
Our generator use Li-ion type battery, if you ever replace the battery
for any reason, be sure to use original GENERGY Li-ion battery. Never use other
type of batteries; the charge-discharge systems of these batteries are different to
traditional lead acid batteries
NOTE:
Respect the cable polarities, connect the red cable (+) to the red
terminal (+) of the battery and the black cable (-) to the negative (-) of the battery.
The white charge cable should be connected to the battery charge terminal.
Incorrect connection can damage electrical parts of the equipment and the battery
itself.
NOTE:
Extreme precautions so as to not make unwanted contact with the
battery terminals and cables, among them or against a metallic part of the
machine.
CHARGE TERMINAL (WHITE WIRE)
BATTERY
TERMINAL
-
TERMINAL
+
