E
sp
a
ñ
o
l
E
n
g
lis
h
P
o
rt
u
g
u
ê
s
64
E
sp
a
ñ
o
l
E
n
g
lis
h
P
o
rt
u
g
u
ê
s
7.3 GENERGY SLEEP function.
When we turn the starting button (DIAL) to the
ON
position, the remote receiver
waits for a signal from the remote control device.
This remote receiver has a small
electric consumption, which is supplied by the battery of the generator. The battery
can discharge if the DIAL remains in the
ON
position without run (
standby
).
To avoid the discharge of the battery, the generator has installed an automatic
disconnection system of the remote receiver.
After 12 hours of the last running, the
receiver will be automatically disconnected.
Now, for the remote control by a new remote control device, it is necessary to
reset the remote receiver. On the control panel press the button
RE-START
RECEIVER
.
7.4 Synchronize new remote control device.
1
On the control panel turn the
DIAL
to the
ON
position.
2
On the control panel press the button
RE-START RECEIVER
.
3
On the control panel keep pressing the
RESET
button until the
PILOT
LAMP
lights up.
4
On the remote control device press the button
START
. And on the
generator, the
PILOT LAMP
flashes for only one time, then keep pressing
the
RESET
button again until the
PILOT LAMP
lights out to quit out. Then
the remote control device has been synchronized correctly.
7.5 Restart the remote control system completely.
Information:
Apply only if the remote start function does not work or works
abnormally.
1
On the control panel turn the
DIAL
to the
ON
position.
2
On the control panel press the button
RE-START RECEIVER
.
3
On the control panel keep pressing the
RESET
button until the
PILOT
LAMP
lights up.
4
On the remote control device press the button
STOP
, and the
PILOT LAMP
on the generator flashes for only one time to delete all synchronized remote
control devices.
5
To synchronize again a remote control device, see point 4 of the chapter
7.4.
NOTE:
Only two remote control devices are allowed to be synchronized with
the remote receiver. So, if you want to synchronize new remote control devices
(loss or damage of the old ones), you have to reset the old synchronized remote
control devices.
Summary of Contents for BAQUEIRA
