background image

 

2

 

 

CAUTION: 
Modified motorcycle will affect its structure or performance, and cause poor engine operation or 

exhaust noise, which will result in shortening the motorcycle’s service life. Besides, modification is 
illegal and does not conform to the original design and specifications. A modified motorcycle will not 

be covered by warranty. Therefore, do not modify your motorcycle at will. 
 

 

3.

 

RIDING TIPS 

z

 

Keep the related parts of your body such as arms, palms, lumbar, and toes relax and ride with 
the most comfortable posture in order to be able to react quickly whenever it is necessary. 

z

 

Rider’s postures will great influent riding safety. As for the riding position, please always keep 
your body’s gravity on the center of seat. If your body’s gravity is placed on the rear of seat, the 

front wheel load will be reduced; this can cause steering handles shaking. Riding in this way is 
dangerous. 

z

 

It will be much easier to make a turn if rider inclines his body inward when turning. On the other 
hand, the rider will feel unstable if his body and the motorcycle do not incline. 

z

 

On bumpy, unleveled and slope road, the road condition may change very often. Driving on 
these roads may become very unstable. To drive safely and smoothly, know your road 

condition before hand, slow down, and hold the handle firmly with aid of your shoulder. 

z

 

Suggestion: Do not load objects on the front pedals unnecessarily, to avoid affecting the riding 

safety and the operation of steering handle. 

 

 

CAUTION: 
Feeling on the handle is different when the vehicle is with load or without load. Overload will make 
steering handle swing and then influent riding safety. Thus, please be ware of load weight. 

 
 

CAUTION: 

z

 

Please do not load cargo or luggage on places where are not designed for loading to prevent 
danger and damage. 

z

 

Do not place rags or similar objects between the storage compartment and engine to avoid 
engine seizure because of inadequate engine oil supply. 

 
 

SUGGESTION 

To maximize the motorcycle’s performance and prolong its service life: 

The first month or first 500km is the wear- in period for the engine and components. Avoid rapid 
acceleration and top speed on a long distance. 

 

Summary of Contents for Ideo 50
























Reviews: