1N00-510 Genesis 80cm Boat v1.1 02/04
©Tornado International Ltd. 2003
-11-
Confidential
2.07 Slave Timer
The slave timer (Diagram 2.06) is mounted on the console motherboard. Each
slave timer serves two playing positions. It is essentially two timers in one
case. The slave timer performs the following functions.
Receives the signal from the credit display to start the game.
Turns the red stop light off and the green start light on.
Transfers model control from internal fixed resistors to the
driving controls
Counts the timing pulses generated by the master timer and
distributed by the console connecting cable.
When it has received the required number of pulses, control is
removed from the driving controls, the end of go sounder
isoperated, the lights are reversed and a signal is sent to the
credit display.
Note!
If the unit is switched off during play, the game will be lost.
2.08 Driving Controls
The driving controls are mounted on top of the console and comprise of a
control for each function of the model. Each boat uses two channels of the
transmitter for its operation. One for the left hand motor and one for the right.
Because we use the direction of rotation of the motors to control the direction
