Manual
5. Flip the breaker bar down and use the handle to position the breaker foot slightly away from
the front edge of the tile.
6. Apply increasing downward pressure on the handle until the tile snaps along the score line.
(P7)
(P8)
To Cut an Angle
1. Loosen the Knob on the ruler guide and slide the Try Square to the desired cutting position.
Rotate them together until the arrow maker is aligned with the the center of the tile cutter.
Tighten the knob.
2. Follow the instructions for Cutting a Straight Line, as described above.
NOTE: Make sure the breaker bar is placed on the tile entirely and slightly away from the front
corner of the tile. It will protect the edge of the tile. (P9)
(P9)
