background image

 

 

ver 1.0 

 

11

11 

absolute fidelity

 

absorptive material or even a piece of furniture can help break up 
this point of first reflection. 

Rear wall.

 In many cases it will be unnecessary to do anything with 

the wall behind your listening position. However, you may want to 
experiment with diffusers or absorbers behind you for best sound. 
Absorption behind the listener is usually beneficial. 

4.5  Mastering the Refinements of the system 

Fine tuning an audio system is an art that will take time and patience. It 
can be one of the more rewarding learning experiences you will have in 
the pursuit of music and its enjoyment. 

One of the best pieces of advice we can offer is that you take advantage 
of your ear's ability to identify similarities in sound. This ability is useful in 
fine-tuning your system because, if every recording you listen to has a 
similarity of sound (too much or too little of a certain frequency for 
instance), then you can be fairly certain that you have yet to perfect your 
set-up. Keep at it, and remember to enjoy your music as you work on 
perfecting your set-up. 

If you have any questions, feel free to contact us at Genesis. Our 
website is the first place that you can look to for more information, but 
you are welcome to either send us an email, or just give us a call! 

Summary of Contents for Genesis 6.1e

















Reviews: