background image

 

 

ver 1.0 

 

4

absolute fidelity

 

You will want to sit eight to twelve feet (2.4 to 4 metres) away from the 
speakers. 

 

18” 

8’ to 10’ 

Toe in by 5

o

 

 

1.3  Connections 

For most applications, the speakers should be plugged directly into the 
output your power amplifiers using high quality speaker cables and the 
5-way binding posts. The speakers has a set of Thru-Put binding posts. 
These are for connecting to an optional ServoSub™. As the Thru-Put 
binding posts are internally connected in parallel, DO NOT use them for 
bi-wiring or bi-amping. 

1.4  Adjustments 

Don’t be too worried by the midrange and tweeter adjustment knobs on 
the back of the G6.1e. The G6.1e will sound great, straight out of the 
box, with these both set at the 12 o’clock position. As you play your 
system for the next hundred hours or so, the speakers will settle in.  

Once you familiarize yourself with their performance, putting a little bit of 
additional effort in tuning the speakers properly into your system (which 
includes the room) will give you greater long-term enjoyment and 
benefits. 

Typical room placement: Place speakers about 18 inches 

into the room, the tweeters on the inside, 5 to 6 feet 

apart, and 8 to 12 feet from the listeners. Toe-in the 

speakers by about 5 degrees towards the listeners. 

Summary of Contents for Genesis 6.1e

















Reviews: