7-103
07
Information
ś
When ‘Highway Driving Assist’ is
deselected, the setting for ‘Highway
Lane Change Assist’ cannot be
changed.
ś
If there is a problem with the functions,
the settings cannot be changed.
Have the vehicle be inspected by an
authorized retailer of Genesis Branded
products.
ś
If the vehicle is restarted, the functions
will maintain the last setting.
:$51,1*
)RU\RXUVDIHW\FKDQJHWKH6HWWLQJV
DIWHUSDUNLQJWKHYHKLFOHDWDVDIH
ORFDWLRQ
OJWEV071238L
Warning Volume
With the vehicle on, select ‘Driver
$VVLVWDQFHƟ:DUQLQJYROXPHŔRUœ6RXQG
Ɵ'ULYHU$VVLVW:DUQLQJƟ:DUQLQJ
Volume’ from the Settings menu to
change the Warning Volume to ‘High’,
‘Medium’, ‘Low’ or ‘Off’ for Highway
Driving Assist.
However, even if ‘Off’ is selected, the
Hands-off Warning Volume will not turn
off but the volume will sound as ‘Low’.
If 'Driving Safety Priority' is selected,
lowers all other audio volumes when the
Driving Safety system sounds a warning.
If you change the Warning Volume,
the Warning Volume of other Driver
Assistance systems may change.
+LJKZD\'ULYLQJ$VVLVW
Operation
Basic function
Display and control
You can see the status of the Highway
Driving Assist operation in the Driving
Assist view on the cluster. Refer to “View
Modes” section in chapter 4.
Highway Driving Assist will be displayed
as below depending on the status of the
function.
Operating state
Standby state
OJWEV071151E
OJWEV071297N
(1) Highway Driving Assist indicator,
whether there is a vehicle ahead
and the selected distance level are
displayed.
Ã
Highway Driving Assist indicator
- Green
: Operating state
- Grey
: Standby state
- White
blink: Accelerator
depressed state
(2) Set speed
(3) Lane Following Assist indicator
(4) Whether there is a vehicle ahead and
the selected headway
(5) Whether the lane is detected or not
