USU4BIPFS-G15 ULTRA
GENESIS
INFRARED HEATER
(62325)
INTRODUCTION
Congratulations on your purchase of the Genesis Mobile Infrared Heater. The Genesis Mobile utilizes short-wave infrared
technology that heats people and objects, not the air and is unaffected by the wind.
For best results and your safety please follow the instructions carefully. Do NOT modify this product in any way as the
manufacturer will accept no liability for improper use.
Model: USU4BIPFS-G15
Color:
Silver
Material: Stainless steel
Model: USU4BIPFSBL-G15
Color:
Black
Material: Aluminum and epoxy
powder coated steel
Model: USU4BIPFSBZ-G15
Color:
Bronze
Material: Aluminum and epoxy
powder coated steel
Height: 2100mm
Width:
715mm (28”)
Lead:
5m
Lamp:
1500 watt gold halogen
(shortwave infrared)
Voltage: 120V AC
Power: MAX 1500W
MOUNTING AND OPERATING INSTRUCTIONS
HEAT, LIGHT, ATMOSPHERE
AT THE FLICK OF A SWITCH!
Switch on for:
2.
Insert the cable plug into
the cable socket and
connect the center column
to the lower column by
screwing clockwise.
(Do not over tighten.)
4.
Pull gently at the
cable at the bottom
of the base to keep
it taut. Fix the cable
to the base with the
cable clamp and
2 M4 screws.
3.
Mount lamp to upper column
with M6 screw and nut.
1.
Insert the flanged
column into the base
and fit the column to the
base with 4 M8 bolts.
ASSEMBLING THE UNIT
(Follow diagrams below)
5.
Switch on the 120v supply.
6.
Switch on the heater by pressing the red switch
mounted on the side of the heater unit which will
illuminate red when the heater is switched on.
7.
Ensure that the plug is removed from power outlet
and the power cord power cord coiled safely when
the heater is not being used.
8.
Allow the heater to cool down after use.
9.
The heater should be stored in a dry location
when not in use. Particular care should be taken
in ensuring the plug is not subjected to water
or damp conditions.
10.
Enjoy.
Figure 1
Figure 2
Figure 3
Figure 4
