CHAPTER 1
GENERAL INFORMATION
1.1 USER MANUAL CONTENT
1.2 INTRODUCTION
This user’s manual contains the operating instructions, installation instructions and specifications of
the Genesys
1500W and 750W power supply series. The instructions refer to the standard power
supplies, including the built-in RS232/485 serial communication. For information related to
operation with the optional IEEE programming, refer to User Manual for Power Supply IEEE
Programming Interface.
Genesys
power supplies are wide output range, high performance switching power supplies. The
Genesys
series is power factor corrected and operates from worldwide AC voltage range
continuously . Output voltage and current are continuously displayed and LED indicators show the
complete operating status of the power supply. The Front panel controls allow the user to set the
output parameters, the protection levels (Over-Voltage protection, Under-Voltage limit and
Foldback) and preview the settings. The rear panel includes the necessary connectors to control
and monitor the power supply operation by remote analog signals or by the built-in serial
communication (RS232/485). GPIB programming and Isolated-Analog programming/monitoring
are optional.
Model
Voltage
Current
Model
Voltage
Current
range(V)
range(A)
range(V)
range(A)
GEN6-100
0-6
0-100
GEN60-12.5
0-60
0-12.5
GEN6-200
0-6
0-200
GEN60-25
0-60
0-25
GEN8-90
0-8
0-90
GEN80-9.5
0-80
0-9.5
GEN8-180
0-8
0-180
GEN80-19
0-80
0-19
GEN12.5-60
0-12.5
0-60
GEN100-7.5
0-100
0-7.5
GEN12.5-120
0-12.5
0-120
GEN100-15
0-100
0-15
GEN20-38
0-20
0-38
GEN150-5
0-150
0-5
GEN20-76
0-20
0-76
GEN150-10
0-150
0-10
GEN30-25
0-30
0-25
GEN300-2.5
0-300
0-2.5
GEN30-50
0-30
0-50
GEN300-5
0-300
0-5
GEN40-19
0-40
0-19
GEN600-1.3
0-600
0-1.3
GEN40-38
0-40
0-38
GEN600-2.6
0-600
0-2.6
GEN50-30
0-50
0-30
Table1-1: Models covered by the manual
Constant Voltage / Constant Current with automatic crossover.
* Active Power Factor correction.
* Universal Input Voltage 85~265Vac, continuous operation.
* Embedded Microprocessor Controller.
* Built in RS232/485 Interface.
* Voltage & Current high resolution adjustment by digital encoders.
* High accuracy programming/readback-16 bit.
* Software Calibration (no internal trimmers / potentiometers).
* Last Setting Memory.
* Independent Remote ON/OFF (opto-isolated) and Remote Enable/Disable.
TM
TM
TM
1.2.1 General description
1.2.2 Models covered by this manual
1.2.3 Features and options
*
6
