Section 7 IFR Procedures
1
st
Ed Nov 2018
IDU-450 EFIS Software Version 8.0H (Rotorcraft)
7-17
1) Waypoint exiting a discontinuity with the exception of start, phantom or
DP reference points;
2) Entry into procedure turn; and
3) First waypoint with the exception of start or DP reference points.
7.3.4. Fly-By
Waypoints
1) CF legs with defined Entry Heading
2) All other waypoints with defined Exit Heading.
MFD
MFD
PFD
Normal Large
Turn
Defined Exit
Large Turn
Defined Entry
Figure 7-9: Fly-By Waypoints
NOTE:
Entry adjustments should be expected anytime a turn exceeds 120
⁰
.
Turns greater than 120
⁰
should not be used in conjunction with RNP
routes. (RNP standards specifically exclude such turns from RNP
requirements.)
Leg segments for paths are constructed by the EFIS as follows.
Auto-
Sequence
Bisector
Auto-
Sequence
Bisector
Auto-
Sequence
Bisector
