Section 6 Quick Start Tutorial
1
st
Ed Nov 2018
IDU-450 EFIS Software Version 8.0H (Rotorcraft)
6-7
3) If HSI source is
NAV FMS
, press
OBS MANUAL (R4)
then scroll
to
desired OBS value and push to enter, or press
OBS SYNC (R3)
and
push to enter.
4) If HSI source is
NAV VLOC1 (L3)
or
NAV VLOC2 (L4)
scroll
to
desired course (OBS:XXX° (XXX°)) and push to enter.
Approaches/Track
Select a VFR Approach on PFD or MFD
The active flight plan must contain an eligible airport for runway selection
and VFR approach creation, or user waypoint.
1) Press
ACTV (L2)
.
2) Scroll
to desired airport or user waypoint and push to enter.
3) Scroll
to
VFR APPR..
and push to enter.
4) Scroll
to desired runway and push to enter.
Change Runway during VFR Approach on PFD or MFD
This deletes the previous VFR approach and creates a new VFR approach
to the selected runway.
1) Press
ACTV (L2)
.
2) Scroll
to any waypoint inside the current VFR procedure and press
DELETE (R3)
. Push
to
.
3) Scroll
to desired airport and push to enter.
4) Scroll
to
VFR APPR..
and push to enter.
5) Scroll
to desired new runway and push to enter.
Select an IFR Approach on PFD or MFD
1) Press
ACTV (L2)
.
2) Scroll
to the desired eligible airport and push to enter.
3) Scroll
to
IFR APPR..
and push to enter.
4) Scroll
to desired approach and push to enter.
5) Scroll
to desired transition and push to enter.
6) Scroll
to desired runway and push to enter.
