Section 7 IFR Procedures
7-16
IDU-450 EFIS Software Version 8.0H (Rotorcraft)
1
st
Ed Nov 2018
1) Waypoint leading into discontinuity;
2) Waypoints which are marked as overfly in the navigation database or
menu system;
3) Exit from holding pattern;
4) Exit from procedure turn;
5) Entry into holding pattern;
6) Missed approach point;
7) Phantom
waypoint
(created by inserting a waypoint into the active flight
plan or performing Direct-To function within the active flight plan –
avoids S-turns);
8) Last
waypoint;
9) Start waypoint (created by creating a new active flight plan with the
Direct-To function – avoids S-turns);
10) Reference (takeoff runway end) waypoint of a DP;
11) Waypoint leading into discontinuity; and
12) Altitude, DME, or radial termination legs (ARINC-424 path types CA,
FA, VA, CR, VR, CD, FD, and VD; see Table 7-4).
13) Waypoints marked as overfly in the navigation database.
Table 7-4: RNAV Path Terminator Leg Type
Path Designator
Terminator
Constant DME arc
A
A
Altitude
Course to
C
C
Distance
Direct Track
D
D
DME Distance
Course from a Fix to
F
F
Fix
Holding Pattern
H
I
Next Leg
Initial I
M
Manual
Termination
Constant Radius
R
R
Radial Termination
Track Between
T
Heading To
V
Examples:
CF
= Course to Fix, and
FM
= Course from a Fix to a Manual
Termination, etc.
The following waypoints are fly-over with a defined exit heading:
