1
EN.800.003-V2.11(2)
SV-16 v2 Quick Start Guide
Introduction
Introduction
This section provides an overview of the SV-16 v2. For information about
SV-16 v2 image version, please see SV-16 v2 Release Notes available on
GTAP.
What is the SV-16 v2
The SV-16 v2 is a compact-sized network security appliance that includes
Genetec security software, and Windows Embedded Standard 7. The SV-
16 v2 is for small-scale, single server installations, and can support both
cameras and access control readers.
You can deploy SV-16 v2 in the following ways:
•
Unified deployment: The SV-16 can support up to 8 cameras and 8
readers in a unified deployment.
•
Video deployment: The SV-16 can support up to 16 cameras in a
video-only deployment.
•
Access control deployment: The SV-16 can support up to 16 readers in
an access control-only deployment.
Supported video configurations
The SV-16 v2 supports the following configurations for Security Center
and Omnicast:
•
Video only with remote video monitoring.
If the client application is
installed on a remote computer, the SV-16 v2 supports the following
configuration:
16 cameras recording at 2 Mbps, and 4 cameras being viewed at 2
Mbps.
•
Video only with local video monitoring.
If the client application is
installed locally, the SV-16 v2 supports the following configuration:
5 cameras recording at 4CIF, 7 frames per second, 80% image quality,
in H.264, and up to 5 cameras being viewed locally at CIF, 10 frames
per second, 50% image quality, in MJPEG. Each camera should sup-
port at least two streams: one for recording, and another for monitor-
ing.
NOTE
It is recommended to run the client applications on a remote
computer.
