SV-32 Network Security Appliance Quick Start Guide
Getting started
EN.804.003-V6(1)
8
Limited desktop icons (recycle bin, libraries)
Cannot shut down/restart Windows
Logging on
The first time you start the SV-32, you are automatically logged in as the Operator
user and the
SV Control Panel
and
SV-32 setup wizard
will open to guide you
through the initial setup of your system.
What you should know
•
You will only be logged on to Windows automatically the first time the
machine is started. After that, a
Username
and
Password
is required to log on
to the machine.
•
The
SV Control Panel
will only open automatically the first time the machine is
started. After that, a user will be prompted to enter Admin credentials to have
access to the
SV Control Panel
.
To log on to SV Control Panel:
1
When prompted, enter the admin user credentials.
2
Click
Connect
.
The
SV Control Panel
opens.
For more details about using the
SV Control Panel
to configure your system, see
the
SV Control Panel User Guide
. This guide is accessible by clicking the
Control
Panel: User guide (PDF)
link on the
About
page in the
SV Control Panel
,
or from
the GTAP
Documents
page, at
