SY-SIX-KLCS | Synergis IX Touch Sense LCD Keypad | Installation Manual
Last Updated July 2018
6
Configuration
Before the keypad will communicate with the Synergis System it must be assigned an address.
To program an address using the system configuration menu, apply power to the keypad and when the screen
displays the keypad version information, press the [EXIT] key then press [ENTER]. A configuration menu is
displayed. Scroll the available options by pressing the up and down keys and [ENTER] to select the menu
item.
The configuration menu can only be accessed when the keypad powers up. It cannot be accessed when the
keypad is operational.
Keypad Address
The address selection sets the address of the keypad. This address must be a unique address in the Synergis
System that is below an address of 250.
Enter device
address: 256
Use the numerical keys 0 to 9 to program the address and press [ENTER] to save the setting. To exit without
making changes press the [MENU] key.
Backlight Brightness Setting
The backlight brightness setting adjusts the brightness for the LCD screen and the keypad's LEDs
Backlight
[******* ]
Use the left and right keys to adjust the brightness and press [ENTER] to save the setting. To exit without
making changes press the [MENU] key.
Default Configuration
The default setting resets the keypad to the factory default settings.
Press [ENTER] to
default keypad.
Press [ENTER] to default the keypad. To exit without defaulting the keypad press the [MENU] key.
