SY-SIX-CTRL-DIN-1D | Synergis IX DIN Rail Single Door Controller | Installation Manual
Last Updated August 2018
5
Introduction
The Synergis IX DIN Rail Single Door Controller is the central processing unit of the Synergis System. It
communicates with all system modules, stores all configuration and transaction information, processes all
system communication, and reports alarms and system activity to a monitoring station or remote computer.
Flexible module network architecture allows large numbers of modules to be connected to the RS-485 Module
Network. Up to 250 modules can be connected to the Synergis System in any combination to the network up
to a distance of 900M (3000ft). Communication beyond this distance requires the use of a RS-485 Network
Extender
The current features of the Controller include:
Internal industry-standard 10/100 Ethernet
32 Bit advanced RISC processor with 2Gb total memory
2 high security monitored inputs
NIST Certified AES 128, 192 and 256 Bit Encryption
Single Door Controller Editions
There are two editions of the Synergis IX DIN Rail Single Door Controller:
The Controller can be supplied power from a 12V DC power supply connected to the N+ and N- terminals.
The Controller with PoE can be supplied power from a 12V DC power supply connected to the N+ and N-
terminals OR from a PoE Router via the onboard Ethernet terminal.
The features specific to the PoE interface described in this manual are only relevant if you are using the
appropriate edition.
