13
Press the Page button repeatedly until all five red numbered lights are flashing red.
Speed and rate settings adjusted using sliders. (Remember, ‘rate’ controls the number of
scenes executed per second, ‘speed’ controls how fast transitions are made between
adjacent scenes.)
Left blue button pressed to run show. (Press again to stop show).
You can also select multiple chases to run consecutively during the running of your light
show. Press the ‘Chase assign’ button repeatedly until the first chase you wish to select is lit
red. Press and hold down the button for 2 seconds. Release, and press repeatedly until the
next chase you wish to select is lit red. You will notice that the chase you have just selected
remains lit. Press and hold the button again for 2 seconds to select the new chase. Repeat
this process until you have selected all the chases you want to play in your light show.
The controller will remember the chases you have selected, and each time you choose to
run a chase or group of chases (see ‘selecting chases, bands and scenes’, earlier in this
manual) the red lights of your selected chases will illuminate to indicate that they will be
performed. You can deselect a chase in the same way; press the ‘chase assign’ button
repeatedly until the one you wish to remove is lit red, and then hold down the button for 2
seconds to remove it from your selection.
Summary of Contents for DM4 DigiMaster
Page 1: ...1 V2 0 ...
