Part No. 46281
Genie GS-2032 & GS-2632 & GS-2046 & GS-2646 & GS-3246
23
Operator's Manual
First Edition • Seventeenth Printing
OPERATING INSTRUCTIONS
To Position Platform
1
Press the lift function select button.
Press and hold the lift function enable
button.
Move the lift/drive selector switch to
the lift position (if equipped).
2 Press and hold the function enable switch on the
control handle.
3 Move the control handle according to the
markings on the control panel.
CE models: When lowering the platform, the
platform should stop when it is 7 feet / 2.1 m from
the ground. Be sure the area below the platform is
clear of personnel and obstructions before
continuing. To continue lowering, release the
control handle, wait 5 seconds, then move the
control handle again.
To Steer
1
Press the drive function select button.
Move the lift/drive selector switch to
the drive position.
2 Press and hold the function enable switch on the
control handle.
3 Turn the steer wheels with the thumb rocker
switch located on the top of the control handle.
Emergency Stop
Push in the red Emergency Stop button to the off
position at the ground controls or the platform
controls to stop all functions.
Repair any function that operates when either red
Emergency Stop button is pushed in.
Auxiliary Lowering/Manual
Lowering
1 Activate the auxiliary lowering/manual lowering
function. Move the toggle switch OR pull the
knob OR push the button.
Operation From Ground
1 Turn the key switch to ground control.
2 Pull out both ground and platform red
Emergency Stop buttons to the on position.
3 Be sure the battery pack is connected before
operating the machine.
To Position Platform
1 Move the up/down toggle switch according to
the markings on the control panel.
Drive and steer functions are not available from
the ground controls.
Operation From Platform
1 Turn the key switch to platform control.
2 Pull out the ground and platform red Emergency
Stop buttons to the on position.
3 Be sure the battery pack is connected before
operating the machine.
