November 2016
Service and Repair Manual
Scissor Components
Part No. 1272220GT
GS-2669 DC • GS-3369 DC • GS-4069 DC
23
Separate the link sets:
1
Using an overhead lifting device attach a 4
hook sling chain to the ends of the inner arm.
Make the chains tight but do not apply lifting
pressure.
Crushing hazard. The linkage
assembly could become
unbalanced and fall if not
properly supported when
removed from the machine.
2
Remove the retaining fasteners from the
center pivot pins.
Note: Do not remove the external snap ring.
3
Using a soft metal drift, remove the center
pivot pins and set aside.
4
Carefully lift and separate the linkage
assembly apart and place it on a structure
capable of supporting it.
