November 2016
Service and Repair Manual
Platform Components
Part No. 1272220GT
GS-2669 DC • GS-3369 DC • GS-4069 DC
15
9
Carefully lift the platform enough to clear the
platform pivot.
10 Slide the platform towards the non-steer end
of the machine until the slider blocks are
visible underneath the slider block channel.
11 Carefully lift the platform off of the machine
and place it on a structure capable of
supporting it.
Crushing hazard. The platform
will become unbalanced and fall
it not properly supported.
Note: Note the position of the slider blocks before
the platform is removed so that when the platform
is installed they will be in the correct position.
2-2 Platf orm Ex tensi on Dec k
2-2
Platform Extension Deck
How to Remove the Platform
Extension Deck
1
Remove the retaining fasteners from the deck
catch and remove the deck catch.
2
Remove the retaining fasteners from the deck
stop and remove the deck stop.
3
Repeat steps 1 and 2 for the other side of the
platform.
1 deck catch
2 deck stop
4
Remove the platform controls from the
platform.
