November 2016
Service and Repair Manual
Non-steer Axle Components
Part No. 1272220GT
GS-2669 DC • GS-3369 DC • GS-4069 DC
83
9-2 Driv e H ub
9-2
Drive Hub
How to Remove a Drive Hub
Component damage hazard.
Repairs to the drive hub should
only be performed by an
authorized dealer.
1
Remove the drive motor. Refer to Repair
Procedure,
How to Remove a Drive Motor
.
2
Using a suitable supporting device, secure the
drive hub. Do not apply pressure.
3
Remove the drive hub retaining fasteners.
Remove the drive hub.
Crushing hazard. The drive hub
may become unbalanced and fall
if not properly supported and
secured with a suitable lifting
device when removed from the
machine.
Note: There is an O-ring between the drive motor
and drive hub. Be sure that it is in place when
installing the drive motor to the drive hub.
Note: Refer to Specifications,
Fastener Torque
Chart Specifications
.
1 axle assembly
2 o-ring
3 retaining fasteners
4 drive hub
