Second Edition • Third Printing
Operator's Manual
Inspections
Part No. 1305661GT
GS
™
-2669RT • GS
™
-3369RT • GS
™
-4069RT
33
Test Auxiliary Power
36 Push and hold the lift function enable button
and raise the platform approximately
2 ft / 60 cm.
37 Push in the red Emergency Stop button to shut
off the engine.
38 Pull out the red Emergency Stop button to the
on position.
39 Press and hold the lift function enable button.
Activate the up/down rocker switch in the
direction indicated by the yellow arrow.
Result: The platform should lower.
Note: The Emergency Stop button can be pushed
when the test is performed.
Test the Outrigger System (if equipped)
40 Push and hold the auto level button.
41 Activate the up/down rocker switch in the
down direction.
Result: The outriggers should extend and level
the machine. A beep will sound when the
machine is level. The indicator lights on the
outrigger LED will be green.
42 Push and hold the auto level button.
43 Activate the up/down rocker switch in the up
direction.
Result: The outriggers should retract and
return to the stowed position. The indicator
lights on the outrigger LED will be red.
Summary of Contents for GS-2669 RT
Page 56: ......
