Second Edition • Second Printing
Operator's Manual
Inspections
Part No. 1278002GT
GS
™
-2669DC • GS
™
-3369DC • GS
™
-4069DC
33
Use this function test procedure if the decal on your
platform controls has these buttons.
Test the Outrigger System (if equipped)
94 Press the outrigger function button.
On the LCD screen, a circle below
the outrigger function symbol will
turn on.
If the control handle is not moved within seven
seconds of pushing the outrigger function button,
the circle below the outrigger function symbol will
turn off and outrigger function will not operate.
Press the outrigger function button again.
95 Press and hold the function enable switch on
the control handle.
96 Move the control handle in the direction
indicated by the yellow arrow.
Result: The outriggers should extend. The
individual outrigger indicator lights will flash
green as the corresponding outrigger extends.
97 Continue holding the control handle in the
direction indicated by the yellow arrow until all
outrigger indicator lights turn solid green and a
long beep is heard from the platform controls
alarm. The machine is now level. At this point,
the drive and steer functions are disabled.
Note: If the control handle is released too soon
during extension, the outrigger indicator lights will
continue to flash green, indicating the outriggers
are not contacting the ground.
Note: If the control handle is released too soon
after the outriggers have contacted the ground, a
long beep will not be heard at the platform controls
and the outrigger indicator lights will be solid green.
If a long beep is not heard and the outrigger
indicator lights are solid green, this condition may
indicate the outriggers are not fully deployed or the
machine is not level.
98 Press the drive function button.
99 Press and hold the function enable switch on
the control handle.
100 Slowly move the control handle in the direction
indicated by the blue arrow, then in the
direction indicated by the yellow arrow.
Result: The machine should not move in the
directions indicated by the blue and yellow
arrows.
101 Press the drive function button.
102 Press and hold the function enable switch on
the control handle.
Summary of Contents for GS-2669DC
Page 59: ......
