Operator's Manual
Second Edition • Second Printing
Inspections
34
GS
™
-2669DC • GS
™
-3369DC • GS
™
-4069DC
Part No. 1278002GT
103 Press the thumb rocker switch on top of the
control handle in the direction indicated by the
blue and yellow triangles on the control panel.
Result: The steer wheels should not turn in the
directions indicated by the blue and yellow
triangles.
104 Raise the platform.
Result: The platform should raise. Raise the
platform to approximately 2.4 m and stop.
105 Fully lower the platform.
106 Press the outrigger function button.
107 Wait seven seconds for the outrigger function
enable to time out.
108 Slowly move the control handle in the direction
indicated by the blue arrow, then in the
direction indicated by the yellow arrow.
Result: The outriggers should not retract.
109 Press the outrigger function button.
110 Move the control handle in the direction
indicated by the blue arrow.
Result: The outriggers should retract. The
individual outrigger indicator lights will turn
solid green as the corresponding outrigger
retracts.
111 Continue holding the control handle until the
outriggers are completely retracted. Release
the control handle when all outrigger indicator
lights turn off. All functions are now restored.
Note: If the control handle is released too soon
during retraction, the outrigger indicator lights will
flash green, indicating the outriggers are not fully
retracted.
Summary of Contents for GS-2669DC
Page 59: ......
