ROUGH TERRAIN FORK LIFT SAFETY
1 - 8
MAINTENANCE AND REPAIR
1. Practice safe maintenance procedures. Perform all maintenance and repairs in
accordance with instructions provided by the manufacturer in the manuals. Also
heed the warnings on the placards and decals on the machine.
2. Always use supports and braces when working on, under or around the machine
or forks.
3. Shut off the engine and lockout the machine while working on the machine unless
instructions specifically require the engine to be running.
4. Always make sure the machine is stationary prior to performing adjustments or
lubrication.
5. Replace all shields and guards after performing service.
6. Always use a piece of cardboard or paper to search for leaks.
7. When performing work on the hydraulic system:
i. Lower the boom to horizontal.
ii. Support the boom with supports or braces.
iii. Shut down the engine.
iv. Relieve all pressure before disconnecting lines.
v. Ensure all connections are tight before applying pressure.
vi. Repair or replace any damaged line, hose or fitting before
applying pressure.
8. Always have tires serviced and mounted by a qualified person with the proper
tools and guards.
9. Always use an inflation cage during tire inflation.
10. Only perform welding on the machine with approval from the manufacturer.
Summary of Contents for GTH-1048
