August 2018
Part No. 57.4400.9220GT
GTH-2506 GTH-3007
3-5
Section 3 • Scheduled Maintenance Procedures
Checklist A Procedures
A-1
Inspect the Manuals and
Decals
Genie specifications require that this procedure
be performed every 8 hours or daily, whichever
comes first.
Maintaining the operator’s and safety manuals
in good condition is essential to safe machine
operation. Manuals are included with each
machine and should be stored in the container
provided in the operator's compartment. An
illegible or missing manual will not provide safety
and operational information necessary for a safe
operating condition.
In addition, maintaining all of the safety and
instructional decals in good condition is mandatory
for safe machine operation. Decals alert operators
and personnel to the many possible hazards
associated with using this machine. They also
provide users with operation and maintenance
information. An illegible decal will fail to alert
personnel of a procedure or hazard and could
result in unsafe operating conditions.
1 Check to make sure that the operator's and
safety manuals are present and complete
in the storage container in the operator's
compartment.
2 Examine the pages of each manual to be sure
that they are legible and in good condition.
Result: The operator's manual is appropriate
for the machine and all manuals are legible and
in good condition.
Result: The operator's manual is not
appropriate for the machine or all manuals are
not in good condition or is illegible. Remove
the machine from service until the manual is
replaced.
3 Open the operator's manual to the decals
inspection section. Carefully and thoroughly
inspect all decals on the machine for legibility
and damage.
Result: The machine is equipped with all
required decals, and all decals are legible and
in good condition.
Result: The machine is not equipped with all
required decals, or one or more decals are
illegible or in poor condition. Remove the
machine from service until the decals are
replaced.
4 Always return the manuals to the storage
container after use.
Contact your authorized Genie distributor or Genie
Industries if replacement manuals or decals are
needed.
