Page
C - 2
Document 57.0008.7200 - 05/2007
Handler with telescopic boom
GTH-3512
OPERATING INSTRUCTIONS
INTRODUCTION
This section provides the operator a practical guide
for the gradual learning of the machine use.
The operator should get into the driving cab and carry
out the preliminary adjustments, then memorise the
position of the different controls and instruments.
The familiarisation with the controls ensures not only
correct use during the working phases, but also a
prompt and timely intervention of the operator, when
he is required to carry out sudden manoeuvres to
safeguard his safety and the machine integrity.
It is necessary to learn how to use and foresee the
machine reactions. Learn how to operate the machine
controls in a safe and open place, without obstacles
and anybody standing around. Do not ram the controls.
Operate them slowly to understand their effect on the
machine.
C-1
BEFORE ENTERING THE
MACHINE
Checks and cleaning
•
Clean glasses, lights and rear view mirrors.
•
Check that pins, joints and bolts are well tightened
in position.
•
Check for oil, fuel or coolant leaks.
Checking the tyres
•
Check the correct inflation of the tyres; see par.
“Tyre inflation”
in the Maintenance section.
•
Make sure that the tyre plies are not cut or worn.
DANGER
A tyre burst may result in serious injury; never use
the machine if tyres are worn, wrongly inflated or
damaged.
Summary of Contents for GTH-3512
Page 2: ...Courtesy of Crane Market...
